Wenzhou Xieshun Mechanical Equipment Co., Ltd.
Wenzhou Xieshun Mechanical Equipment Co., Ltd.
Products
4/6 Corner High Speed Folding And Gluing Machine
  • 4/6 Corner High Speed Folding And Gluing Machine4/6 Corner High Speed Folding And Gluing Machine

4/6 Corner High Speed Folding And Gluing Machine

Model:TFG-900C

This 4/6 Corner High Speed Folding And Gluing Machine from XIESHUN supplier is specially designed to efficiently handle the folding and gluing process of 4-corner or 6-corner cartons. The machine uses an advanced control system to accurately control key parameters such as cardboard position, glue amount, gluing pressure, etc., ensuring the consistency and stability of product quality.

TFG-900C 4/6 Corner High Speed Folding And Gluing Machine is ideal for working with medium and large boxes in the heavy packaging industry. Its design includes driven upper carriers, making easy the precise folding and closing micro-flute and corrugated boxes in its advance. Folding inner lifting optional function, fast exchange of accessories, easy setup together with faster production speed, guarantee a high productivity and quality of work. Meet the most demanding packaging market.


Model TFG-900 C
Suitable material 200-800g/㎡cardboard and N/F&E flute corrugated board
Speed range 0-400m/min
Inching speed 30m/min
Max blank width 900mm
Dimension(L) 15800mm
Dimension(W*H) 1400mm×1900mm
Mechanical weight 9T
Mechanical power 23.2kw
Compressed air 6bar
Air compressor capacity 10㎡/h
Air tank capacity 60L


Model
TFG-900 C
A 160-900mm
B 100-900mm
E 70-440mm
A 170-850mm
B 170-900mm
E 80-440mm
A 160-850mm
B 160-800mm
H 25-120mm
A 270-700mm
B 160-450mm
H 25-120mm
A 270-700mm
B 160-800mm
H 25-120mm



PARTIAL PICTURES OF MACHINE

Feeder

◆The left and right side baffles are easy to lift.

◆The paper feeding belt of the paper feeding unit can be adjusted independently to ensure smooth and stable paper feeding.

◆Servo motor, independent speed regulation to ensure uniform paper spacing.

◆Paper feeding suction device (optional).

Alignment

◆The cardboard sent out by the paper feeding department is corrected and guided by the correction department to make the cardboard run in a straight line.

◆The upper pressure drive of the correction department can be adjusted up and down to adapt to different cardboard thicknesses and provide stability guarantee.

Pre-folding Section

◆The segmented left and right upper belt plates can be adjusted according to product requirements, which is fast and efficient.

◆It can efficiently complete the 180-degree pre-folding of the carton on line 1 and the 135-degree pre-folding of the 3rd line to optimize the final forming effect.

◆Self-drive upper carriers,precise folding for corrugated boxes

Lock Bottom

Three groups of conveyor belt structure, segmented upper belt plate function, can effectively overcome the problems in the production of special-shaped box products.

The middle upper belt plate is detachable and can be disassembled and debugged according to product requirements.

4&6-corner Device

◆The electronic folding hook driven and controlled by the intelligent servo motor is installed on two independently controlled servo axes to accurately guide the folding of all the box flaps.

◆It can produce four-corner and six-corner boxes and other different types.

◆The human-machine interface is intelligently set, easy to operate, intuitive and easy to understand.


Lower Gluing Unit

◆Mechanical left and right lower glue cylinders, with separate design of glue wheel and glue cylinder, high speed without glue throwing, easy to clean and maintain.

◆The glue wheel is 5mm wide and can be replaced according to the product.

Folding Section

◆3-plate transmission belt structure.

◆The left and right outer folding belt speeds can be fine-tuned independently to ensure forming accuracy.

◆Self-drive upper carriers,precise folding for corrugated boxes

Transfer Section

◆Separate motor with independent frequency conversion.

◆The upper and lower belt extension adjustment is simple and easy to operate.

◆Equipped with high-speed electronic kick counter.

Control Panel

◆Adopt 10-inch large screen, easy and intuitive operation.

◆Multiple languages are available.

◆Memory function and remote control (optional).

Conveyor

◆In automatic mode, the box spacing is set, the belt speed and the host speed are proportionally linked, and the belt moves when the photoelectric detects the box.

◆In manual mode, the belt moves at a constant speed and is not affected by the host speed.

◆The pressure part adopts pneumatic pressing, the pressure control is more precise, and the product bonding effect is more guaranteed.




Hot Tags: 4/6 Corner High Speed Folding And Gluing Machine, China, Manufacturer, Supplier, Factory, Quality, Customized, CE
Send Inquiry
Contact Info
For inquiries about folder gluer, folding gluing, folder gluer accessories or price list, please leave your email to us and we will be in touch within 24 hours.
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept