Wenzhou Xieshun Mechanical Equipment Co., Ltd.
Wenzhou Xieshun Mechanical Equipment Co., Ltd.
Automatic Heavy Duty 4 and 6 corner Box Gluing Machine
  • Automatic Heavy Duty 4 and 6 corner Box Gluing MachineAutomatic Heavy Duty 4 and 6 corner Box Gluing Machine

Automatic Heavy Duty 4 and 6 corner Box Gluing Machine


XIESHUN, established in China, is a reputable and professional factory that specializes in the production of high-quality Automatic Heavy Duty 4 and 6 corner Box Gluing Machine. XIESHUN has a strong focus on delivering only the best products to customers, and renowned for exceptional expertise in this field.

XIESHUN MFG-1250C Automatic Heavy Duty 4 and 6 corner Box Gluing Machine apply in medium and large boxes in the heavy packaging industry. Special self-drive upper carriers, get the precise folding micro-flute and corrugated boxes become easy. Folding drive by Independent servo Motor for accurate speed adjustment. Secondary-Creasing can align the fish tail of cartons due to different reasons such as improper die cuttingand creasing. MFG-1450 folder gluer machine with Versatility, quick-change of accessories, easy setup, High speed, high production.

Model MFG-1250 C
Suitable material 200-800g/㎡cardboard and N/F&E flute corrugated board
Speed range 0-400m/min
Inching speed 30m/min
Max blank width 1250mm
Dimension(L) 1750mm
Dimension(W*H) 1800mm×1600mm
Mechanical weight 10T
Mechanical power 29kw
Compressed air 6bar
Air compressor capacity 10㎡/h
Air tank capacity 60L


MFG-1250 C

z Min/mm z Max/mm
A 100mm 1250mm
B 180mm 1000mm
E 85mm 600mm
A 200mm 1050mm
B 100mm 1000mm
E 90mm 515mm
A 180mm 1050mm
B 140mm 1000mm
H 30mm 150mm
A 180mm 1050mm
B 140mm 1000mm
H 30mm 150mm
A 220mm 1000mm
B 140mm 1000mm
E 15mm 50mm



◆The left and right side baffles are easy to lift.

◆The paper feeding belt of the paper feeding unit can be adjusted independently to ensure smooth paper feeding.

◆Servo motor, independent speed regulation to ensure uniform paper spacing.

◆Paper feeding suction device (optional).


◆The cardboard sent out by the paper feeding unit is corrected and guided by the correction unit to make the cardboard run in a straight line.

◆The upper pressure drive of the correction unit can be adjusted up and down to adapt to different cardboard thicknesses and provide stability guarantee.

Pre-folding Section

◆The segmented left and right upper belt plates can be adjusted according to product requirements, which is fast and efficient.

◆It can efficiently complete the 180-degree pre-folding of the carton on line 1 and the 135-degree pre-folding of the 3rd line, optimizing the final forming effect.

◆Self-drive upper carriers,precise folding for corrugated boxes

Lock Bottom

Three groups of conveyor belt structure, segmented upper belt plate function, can effectively overcome the problems in the production of special-shaped box products.

The middle upper belt plate is detachable and can be disassembled and debugged according to product requirements.

4&6-corner Device

◆The electronic folding hook driven and controlled by the intelligent servo motor is installed on two independently controlled servo axes to accurately guide the folding of all the box flaps.

◆It can produce four-corner and six-corner boxes and other different types.

◆The human-machine interface is intelligently set, easy to operate, intuitive and easy to understand.

Lower Gluing Unit

◆Mechanical left and right lower glue cylinders, with separate glue wheel and glue cylinder design, high speed without glue throwing, easy to clean and maintain.

◆The glue wheel is 5mm wide and can be replaced according to the product.

Folding Section

◆3-plate transmission belt plate structure.

◆The left and right outer folding belt speeds can be fine-tuned independently to ensure molding accuracy.

◆Self-drive upper carriers,precise folding for corrugated boxes

Transfer Section

◆Independent frequency conversion of separate motors.

◆Easy to adjust the upper and lower belt extension.

◆Equipped with high-speed electronic kick counter.

Control Panel

◆Adopt 10-inch large screen, easy and intuitive operation.

◆Multiple languages are available.

◆Memory function and remote control (optional).


◆In automatic mode, the box spacing is set, the belt speed and the host speed are proportionally linked, and the belt moves when the photoelectric detects the box.

◆In manual mode, the belt moves at a constant speed and is not affected by the host speed.

◆The pressure part adopts pneumatic pressing, the pressure control is more precise, and the product bonding effect is more guaranteed.

Hot Tags: Automatic Heavy Duty 4 and 6 corner Box Gluing Machine, China, Manufacturer, Supplier, Factory, Quality, Customized, CE
Send Inquiry
Contact Info
For inquiries about folder gluer, folding gluing, folder gluer accessories or price list, please leave your email to us and we will be in touch within 24 hours.
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept